Footing

Concrete for a 50 ft footing, 24×12 in

A 50 ft run of 24 in × 12 in strip footing. The volume is the trench cross-section times the run. That is 100 cubic feet, or 3.7 cubic yards: 167 bags of 80 lb premix or 223 bags of 60 lb, before any waste.

By MixRatio · Published 19 July 2026 · Last updated 13 October 2026

Concrete needed

3.7cubic yards· 2.832 m³· 100 ft³

Bags of premix needed for concrete for a 50 ft footing, 24×12 in, by bag size.
Bag size	Bags needed
40 lb	334
60 lb	223
80 lb	167
25 kg	242
30 kg	202

Planning estimate, with no waste allowance included. Add 5-10% for spillage and over-excavation, and check the yield printed on your bag. Structural work must follow your local building code and an engineer's specification.

Bagged or ready-mix?

Ready-mix

3.7 yd³ is comfortably past the short-load band and inside a single truck. Ready-mix will almost certainly be cheaper than bags here, and it arrives as one continuous pour instead of however many batches you can mix in a row. The bag count above is for costing the comparison, not for planning the day.

Same job, other sizes

24 × 12 in footing

Volume for each size. The order columns add 10%, the top of the 5-10% waste allowance, and round bags up.
Size	ft³	yd³	yd³ to order (+10%)	80 lb bags (+10%)	60 lb bags (+10%)
10 ft run	20	0.74	0.81	37	49
15 ft run	30	1.11	1.22	55	74
20 ft run	40	1.48	1.63	74	98
24 ft run	48	1.78	1.96	88	118
30 ft run	60	2.22	2.44	110	147
40 ft run	80	2.96	3.26	147	196
50 ft run (this page)	100	3.7	4.07	184	245
60 ft run	120	4.44	4.89	220	294
80 ft run	160	5.93	6.52	294	392
100 ft run	200	7.41	8.15	367	489

Per unit

Each foot of this 24 × 12 in footing holds 2 ft³, so one cubic yard pours about 13.5 ft of it.

One 80 lb bag fills about 4 in of run.

Change the dimensions in the footing calculator. Why every count rounds up: how many bags of concrete you need.

At this size

What changes on a 50 ft footing, 24×12 in

Mixing or ordering it

167 × 80 lb bags is 3.7 yd³ - about 84 mixer batches. At this size the bag count is a costing reference rather than a plan: mixing 167 bags on site cannot keep ahead of the setting edge, so the pour ends up full of cold joints. Ordered by the yard it is part of a single load. Have the crew, the access and the discharge points sorted before anything arrives.

The dimensions used

Dimensions this estimate was worked out from.
Run	50 ft
Width	24 in
Depth	12 in

Change these numbers in the footing calculator

How it is worked out

A strip footing is a long rectangular prism under a wall; a spread footing is a pad under a column. Either way the volume is length × width × depth. Enter the total run of the footing as the length, and the trench cross-section as width × depth.

That volume - 100 ft³ - is divided by 27 to give 3.7 cubic yards, and by each bag's yield to give the bag count. An 80 lb bag of premix yields about 0.60 cubic feet, so this job takes 167 of them; bag counts always round up, because you cannot buy part of a bag.

Ordering ready-mix instead? Suppliers sell by the cubic yard (or cubic metre) and usually have a minimum load and a short-load surcharge - worth a call before you choose between bags and a truck.

Formwork

What is being measured

Nearby

Next sizes up and down

Concrete for an 80 ft footing, 16×8 in2.63 yd³